Mantor Classic + Tugging Kit + Retainer

139.00$

Mantor restorer weight foreskin restoration device
mantor restorer tugging device foreskin restoration
Guide for choosing a Rod
Guide for choosing the pusher for you
Mantor restorer weight foreskin restoration device
mantor restorer tugging device foreskin restoration

When it comes to Foreskin Restoration, It is recommended to stretch your foreskin using a variety of tugging methods so that each part of your foreskin will get stretched.

Doing several tugging methods together at the same time makes a powerfull combination that will speed up your restoration.

With this kit you can get the most out of your Mantor device!!! Use it as a Dual tension, as a tugger or as a weight device, it’s your choice.

Save your money, don’t buy a separate device for each tugging method*

*(The washers are not included in the kit)

Do you wish to spice up your restoration with additional tugging methods?

Click to see the Mantor’s guide on how to use a tugging strap

Want to learn more about the Mantor devices, tugging techniques and much more?

Check out the Mantor’s videos page and learn all there is to know

Weight 0.06 g
Dimensions 4 × 4 × 5.5 cm
Color

Antique Bronze, Charcoal Black, Golden Stone, Ivory White, Purple Dream, Silver Gray, Sky Blue, Sunset Red
Pusher Pad Type

Notched, Round
Pusher Pad Size

A 28mm, B 30.5mm, C 33mm, D 35.5mm, E 38mm, F 40.5mm, G 43mm
1st Rod length

8 Cm, 9 Cm, 10 Cm, 11 Cm, 12 Cm, 13 Cm, 14 Cm, 15 Cm, 16 Cm, 17 Cm, 18 Cm, 19 Cm, 20 Cm, 21 Cm, 22 Cm
2nd Rod length

8 Cm, 9 Cm, 10 Cm, 11 Cm, 12 Cm, 13 Cm, 14 Cm, 15 Cm, 16 Cm, 17 Cm, 18 Cm, 19 Cm, 20 Cm, 21 Cm, 22 Cm
Retainer Size

Medium 26-32mm, Large 33-38mm, XLarge 39mm-45mm
Tugging Kit Type

Classic

Reviews

There are no reviews yet.

Be the first to review “Mantor Classic + Tugging Kit + Retainer”

Your email address will not be published. Required fields are marked *

Related products

HOW TO CHOOSE THE CORRECT ROD FOR THE MANTOR DEVICES?

For Beginners with Foreskin restoration who measure themselves at a CI 1 or CI 2 level

Normally 1 Rod of 8 Cm and another Rod of 10 Cm should be good to begin with.

If you are more than CI 2, please measure your foreskin’s stretchable length to find the correct Rod size for you. 

HOW TO MEASURE YOUR FORESKIN’S STRETCHABLE LENGTH IN 4 SIMPLE STEPS?

1. Place your index fingers on the glans. With the other hand grab the foreskin.

2. Slowly push the glans inside the penis. With the other hand pull the foreskin forward as far as possible.

3. Mark with the thumb the point where the foreskin reaches to.

4. Use a measurement tool to measure the distance.

Calculation of the correct rod size:

Now that you know your foreskin’s stretchable length, you should add 3 cm to the number you have measured.
For example, in the photo the number is 8 so a rod of 11 cm will be the one that fits.
8cm+3cm=11cm

Another example, If your stretching distance turned out to be 9.5 Cm, round it up to 10 Cm and add 3.
10+3=13 Cm.  The correct Rod size for you will be 13Cm

When ordering it is recommended to choose one rod according to the size obtained in the calculation and a second rod slightly longer (2-3 cm) to enjoy both the possibility of a good tug with a short rod and a longer one you can grow into.
You can add more rods to your order at the accessories part of the shop, and enjoy even more flexibility.


Guide for choosing a pusher

 

Guide for choosing the right pusher for you!

 

The Pusher pads are divided into two types: Notched and Round.

First step in choosing the pusher for you is to determine whether you need a notched pusher or a round pusher.

Notched is for restorers who are left with a remnant of the frenulum.

Round is for those without any frenulum left.

 

How can I tell if I have some frenulum left?

Normally there should be a thin line under the glans where the frenulum sits. If you can see a line, then you probably have some left, so you should choose the Notched pusher. If there’s no line, and you don’t feel this area is more sensitive to touch, you should probably go for the round pusher.

 

How to find the correct pusher to fit your glans?

Each type of pusher comes in 7 different sizes. 

You should first measure your glans, when flaccid, to decide which size fits you.

We have prepared a sizing guide for finding the fitting pusher for you. Simply click on the picture below and print the document.

 

***It is highly recommended to use the sizing guide to get the most accurate choice***

 

***Make sure that you’re printing on an A4 paper. On page sizing option, set it to custom scale at 100%***

 

  Click on the picture to print the document Glans sizing guide

 

 

 

Once you have printed the document, please follow these steps:

 

Step 1:Place a credit card or any other card of the same size on the drawing to make sure you have the correct scale.

Step 2: Fold the paper at the horizontal line.

Step 3: Cut the inner section of the circle.

Step 4: Slide your glans through the hole. The first size that your glans can easily slide through, without any contact with the paper – is the one for you.  Don’t choose one that your glans can’t go through easily.

 

If you can’t print our sizing guide, you can choose the fitting pusher according to your glans’ width.

 

How to measure your glans’s width?

We recommend using a caliper as shown in the picture below:

 

If you don’t have a caliper, then you can make a DIY Caliper by following these instructions:

 

 

Step 1: You need a ruler and two paper stripes.

Step 2: Fold the paper a few times to make it thicker, and then fold it a few times around the ruler.

Step 3: Use a duct tape to attach one strip of paper to the ruler. Make sure the stripe is aligned with the ruler’s measurements units.

Step 4: Move the second stripe on the ruler until the two stripes of paper gently touch the glans.

***If you don’t want to mess around with measuring, and you prefer to do it simple and quick, you can lay a ruler directly on the glans as shown in the picture below. Please be aware that it’s not as precise as the other methods. Make sure to look carefully!***

 
How to match your measurement with the correct pusher?

 

Below you will find the width of each pusher size. Ideally, the pusher width should be 1-3 mm larger than your glans’ widest part at the base.

 

For example: if your glans’ measurement is 34 mm, you should go for the D size pusher. If it’s 35 mm, choose the E size pusher.

Whatever happens, don’t choose a pusher that is smaller than your glans. If there’s a doubt, go for the larger size!

 

Size A: 28 mm/1.1 Inches

Size B: 30.5 mm/1.2 Inches

Size C: 33 mm/1.3 Inches

Size D: 35.5 mm/1.4 Inches

Size E: 38 mm/1.5 Inches

Size F: 40.5 mm/1.6 Inches

Size G: 43 mm/1.7 Inches

 

I have received my pusher, how do I know if I made the right choice?

Here is a series of pictures to illustrate the difference between the pusher’s sizes.

These pictures will help you to determine whether the pusher you have chosen is indeed suitable for you.

The crucial factor is the width and not the depth. The Pusher should be as close as possible to the width of your glans without being too small or too big.

Is it really that important to do all these measurements?

Definitely yes. The Mantor’s unique pusher is designed to let you comfortably put pressure on your glans without causing any discomfort. A fitting pusher is crucial for your success. Getting a pusher that is too small or too big greatly reduces your comfort, and will most likely prevent you from enjoying the full potential of the Mantor.

 
What is it made of?

The Mantor’s pusher pad is made from a skin safe, platinum soft silicone manufactured in the USA.

 

Join our growing community