Mantor AirPad

How Does It Work? 

The mechanism operates based on the principles of physics, showcasing its elegance and simplicity. When the AirPad comes into contact with the glans, the air within its center undergoes compression, while simultaneously, the glans creating a seal on the outer circumference of the pusher to retain the trapped air. As a result, an unparalleled level of comfort is achieved, giving the glans a sensation of floating rather than being subjected to pressure. This straightforward yet innovative addition marks a significant advancement for the Mantor devices, aiming to enhance the process of foreskin restoration by providing a more comfortable and enjoyable experience.

How to Use the Mantor AirPad?

Using the Mantor with the AirPad is a straightforward process. Before each use, gently pull one side of the AirPad away from the pusher to inflate until it becomes flat with the pusher (see the picture below). Once this is done, the device is ready for use.

***For Notched pushers, ensure that the part of the AirPad located at the notch is positioned on the top surface of the pusher.***

There are 3 important points to consider:

• 1) When you receive your order, the AirPad on the pusher may not inflate immediately as shown in the guide. This is because the AirPad needs to adjust and conform to the shape of the pusher. It typically takes about a day or two of regular usage for the AirPad to settle, after which you will be able to use it with air.
• 2)The extra pad adds thickness to the pusher, which may make it challenging to fully insert it under the gripper in some cases. If you encounter difficulty and the extra distance prevents you from successfully putting on the Mantor, you can use the pusher without the AirPad for a short period. As you gain familiarity with the device and your skin gradually loosens, it is very likely that you will be able to successfully use the AirPad within a few weeks. 
• 3) When you change to a new AirPad, it might seem to be long. In that case you can trim it to the length that fits your pusher. (New Mantor kits come with the AirPad pre-adjusted to the correct size, so no trimming is required in those cases)

How to wrap the AirPad around the pusher:

Step 1: Insert your thumb into the AirPad and position it at the base of the pusher.

Step 2: Wrap the AirPad around the pusher while maintaining pressure with your thumb.